Yes, we do have a leg kit for use with the Blackstone On the Go Portable Griddle # BL76FR with the part # BL27FR which also has a side shelf too. view full answer...
I think the Fastway e2 Weight Distribution w/ 2-Point Sway Control part # FA92-00-0800 that you looked at will be a great fit for your North Trail 21FBS. You can set it up with your standard load in the camper and when you do haul your ATV in the bed of the truck you can adjust the brackets slightly higher to increase the effect and keep your handling and ride quality consistent. view full answer...
If you are regulating your propane twice that would be why you are experiencing low output on your grill. This is further proven when you said you ran it directly to your propane tank and the grill worked fine.
So what you need is a tee connector installed in line with your current propane tank before the regulator like with the part # 103537-MBS so that you can get unregulated propane to your grill that has a regulator. view full answer...
The Rhino Rack part numbers # RRVA118B-2, # RRRLKVA, and # DK394 is a fit for your 2012 Lexus CT 200h and would be a great option. This is the best quality rack for the price.
The rack has a 165 lb capacity but you would need to check the owners manual of your vehicle to determine it's capacity as well. view full answer...
We do not carry the metal grids for the bottom of your sink bowls. I found them difficult to get debris sprayed out from underneath and when you pull them out to clean the bottoms you might get a surprise. What I personally use it the Camco # CAM43517 Sink Kit which includes a sink mat if you like that. I find that the dish pan fits perfectly into one wash bowl letting me wash them and then throw out the soap water. Then the dish drainer fits the other side to stack in soapy dishes awaiting... view full answer...
First, you do not want to run your camper's tires under-inflated. Trailer tires, all of them, are designed to be operated at their full rated pressure as indicated on the side wall. Under-inflation will lead to heat build-up and stress in the sidewalls and could lead to damage or failure. I do realize your intent to gain a wider footprint through a more flexible tire surface, but this is not recommended for safety reasons.
Please take a look at the linked article on trailer tire sizes.... view full answer...
We've got a few options that would work for you.
The B&W Companion with slider, part # BWRVK3775 would be a solid choice. The hitch uses 1 inch thick jaws that hold the king pin in a 360° grip for a superior ride. The slider is manually operated, but the rails that the hitch slides back and forth on are round, instead of the older rectangular bars that liked to bind up if you were parked anywhere that wasn't flatter than a pool table.
This being said, I think you'd be happier with the... view full answer...
We definitely have a couple options to store stuff outside the vehicle and a roof rack and basket will be a great option. I do have another potential way to go that I will lay out at the end, but I will start with the roof option.
I also like the price point of Rhino Rack parts, so I tend to recommend them. With that being said, for your 2015 Mazda CX-5, you will need to start with the DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK289. These will attach to fixed mounting points... view full answer...
The etrailer Folding Cargo Carrier part # e98874 that you referenced should work well on your 2015 Wrangler and clear the spare when folded up. If you check out the video I attached you will see that this carrier should clear the spare when folded up and should allow the rear gate to open slightly when the carrier is folded down. It should work well for you. view full answer...
Go To Results